binder Circular Connector, 4 Contacts, Cable Mount, M9 Connector, Plug, Male, IP40, 711 Series

Series 711, M9, male cable connector, subminiature connector with screw locking and IP40 ingress protection. These M9 male cable connectors have solder terminations and the cable housings have integrated strain relief.

For dimension information, please refer to the ’Technical Specification’ table below.

The Binder 711 series 4-contacts, M9 male subminiature circular connector has a plug-type connection. This cable mount connector has a voltage rating of 125V and a current rating of up to 3A per contact. This connector is made of polyamide with gold-plated bronze contacts. It supports a screw-on locking mechanism for sturdy mating attenuation and reliable contact.
Binder 711 - metal
The Series 711 subminiature round plugs are connectors of a simple design with very small dimensions and are protected to IP40. High reliability permits frequent connection and disconnection. Cable strain relief is achieved by a crimp ferrule.

Straight body orientation
Solder termination
Durability is greater than 500 mating cycles
Not shielded
Internal strain relief
Wire gauge is 24AWG
Shell size is 11.5mm
Cable outlet ranges between 3mm and 4mm
Operating temperature ranges between -40°C and 85°C

Process control
Industrial automation and instrumentation
Commercial electronics

IP40 rated
UL approved

Binder 711 - Metal

The Series 711 subminiature round plugs are connectors of a simple design with very small dimensions and are protected to IP40. High reliability permits frequent connection and disconnection. Cable strain relief is achieved by a crimp ferrule.