- RS stock no.:
- 201-0719
- Mfr. Part No.:
- 8.06.13 J-Link Measurement+Patch Adapter
- Manufacturer:
- SEGGER
2 Available from UK/Europe in 4–6 working days for collection or delivery to major cities (Heavy, hazardous or lithium product excluded. Delivery T&C's apply)
Not Available for premium delivery
Added
Price (Excl VAT) Each
R 2 800,50
(exc. VAT)
R 3 220,58
(inc. VAT)
Units | Per unit |
1 + | R 2 800,50 |
- RS stock no.:
- 201-0719
- Mfr. Part No.:
- 8.06.13 J-Link Measurement+Patch Adapter
- Manufacturer:
- SEGGER
Technical data sheets
Legislation and Compliance
Product Details
The SEGGER J-Link Measurement+Patch Adapter provides test points for all debug signals to allow easy access for test probes. It has a standard 20-pin 0.1" socket towards the J-Link debug probe and a standard 20-pin 0.1" header on the target side and can directly be inserted between the J-Link and the debug cable maintaining a 1:1 connection of all debug signals. For increased flexibility VTref on pin 1 and the target supply voltage on pin 19 can be interrupted by means of two jumpers.
Allows easy customized wiring between J-Link and targets that do not provide a standard debug connector that has already been addressed by one of the many available J-Link adapters
The wiring between J-Link and the target is done via coloured jumper wires
Includes:
Measurement Adapter Board
10 Jumper Wires for Manual Setup
The wiring between J-Link and the target is done via coloured jumper wires
Includes:
Measurement Adapter Board
10 Jumper Wires for Manual Setup
Specification
Attribute | Value |
---|---|
Accessory Type | Adapter |