Login / Register to access your benefits
Recently searched

    Sheet Metal & Panel Fasteners

    Our advanced selection of sheet metal and panel fasteners includes many types of nuts, bushes, mandrels, stand-offs and studs, as well as multi-piece insert kits and more.

    These products are suitable for a broad range of metalworking, assembly and production tasks that involve thin sheet metal materials, such as general machinery building/assembly, tube bending, lathe work and mounting rails of equipment racks.

    What are the key differences between panel fastener types?

    • Cage nuts are typically used for mounting front panels to slide systems and instrument housings. A steel nut is held captive in a spring-steel cage for added grip/durability, and ideally used with a range of front panel screws.
    • Captive nuts work similarly to cage nuts; when compressed during insertion they secure, lock and hold the nut in the desired position.
    • Clinch nuts are most often used as permanent installations on thin sheet materials like aluminium. Once inserted into a properly sized hole, a parallel squeezing force is applied to the head of the self-clinching nut, causing a flow of material into specially designed grooves under the head for a load-bearing, torque-resistant joint. Along with self-clinching captive studs, they're often found as fasteners in white goods and various electrical assemblies and enclosures.
    • Self-clinching standoffs work similarly to rivet bushes, in that they're designed to allow greater loads to be affixed to relatively thin or weak materials. They're used to insert a load-bearing thread into a sheet of material, often in order to raise it above another piece (e.g. lifting a PCB away from a metal case to prevent shorting.
    • Through-threaded standoffs are fully drilled out, while the hole in a blind-threaded standoff is only cut to a partial depth for retaining smooth, closed outer panels when inserted flush with a surface.
    • Mandrels are a special type of shaft or bar fastener, designed to be inserted into holes in sheet metals in order to hold them securely in place during machining. They're sold in plain tempered steel varieties, as well as expanding versions (slightly tapered with an expandable wedge for holding your work), or straight threaded nut mandrels.
    Insert Kits
    Insert Kits
    Mandrels
    Mandrels
    Self-Clinching Captive Studs
    Self-Clinching Captive Studs
    Self-Clinching Standoffs
    Self-Clinching Standoffs
    Thread Repair Inserts
    Thread Repair Inserts
    Threaded Inserts
    Threaded Inserts

    301 Products showing for Sheet Metal & Panel Fasteners

    1 of 16
    RS PRO, M3 Brass Threaded Insert, 4.6mm diameter 4mm Depth 5.7mm
    • RS stock no. 204-0616
    1 Bag of 100
    R 362,91
    RS PRO Thread Repair Insert, M8 x 1.25mm, Drill Size 8.3
    • RS stock no. 175-0432
    Each (In a Pack of 20)
    R 8,713
    RS PRO, M3 Brass Threaded Insert diameter 4mm Depth 4.78mm
    • RS stock no. 278-534
    1 Bag of 100
    R 335,57
    RS PRO Thread Repair Insert, M8 x 1.25, Drill Size 8.3
    • RS stock no. 175-0418
    Each (In a Pack of 20)
    R 5,788
    RS PRO Thread Repair Insert, M10 x 1.5, Drill Size 10.3
    • RS stock no. 175-0433
    Each (In a Pack of 10)
    R 10,412
    RS PRO Thread Repair Insert, M4 x 0.7, Drill Size 4.1
    • RS stock no. 175-0429
    Each (In a Pack of 20)
    R 7,026
    RS PRO Thread Repair Insert, M6 x 1, Drill Size 6.2
    • RS stock no. 175-0424
    Each (In a Pack of 20)
    R 5,743
    RS PRO Thread Repair Insert, M4 x 0.7, Drill Size 4.1
    • RS stock no. 175-0422
    Each (In a Pack of 20)
    R 5,691
    RS PRO Thread Repair Insert, M10 x 1.5, Drill Size 10.3
    • RS stock no. 175-0426
    Each (In a Pack of 10)
    R 8,985
    RS PRO Thread Repair Insert, M5 x 0.8, Drill Size 5.2
    • RS stock no. 175-0423
    Each (In a Pack of 20)
    R 5,728
    RS PRO, M4 Brass Threaded Insert, 6.3mm diameter 5.6mm Depth 8.2mm
    • RS stock no. 204-0617
    1 Bag of 100
    R 549,74
    RS PRO Steel Zinc plated & clear Passivated Self Clinching Stud, M6, length-20mm
    • RS stock no. 827-445
    1 Bag of 50
    R 262,92
    RS PRO Thread Repair Insert, M3 x 0.5, Drill Size 3.1
    • RS stock no. 175-0414
    Each (In a Pack of 20)
    R 4,23
    RS PRO Thread Repair Insert, M3 x 0.5, Drill Size 3.1
    • RS stock no. 175-0428
    Each (In a Pack of 20)
    R 6,996
    Recoil Thread Repair Insert, M8 x 1.25, Drill Size 8.3mm
    • RS stock no. 528-665
    • Mfr. Part No. 25083
    1 Bag of 10
    R 151,67
    RS PRO Thread Repair Insert, M5 x 0.8, Drill Size 5.2
    • RS stock no. 175-0416
    Each (In a Pack of 20)
    R 4,268
    RS PRO M6 Mandrel
    • RS stock no. 260-5849
    Each
    R 308,45
    RS PRO, M3 Brass Threaded Insert diameter 4mm Depth 4.78mm
    • RS stock no. 278-584
    1 Bag of 100
    R 401,81
    RS PRO, M6 Brass Threaded Insert diameter 8mm Depth 12.7mm
    • RS stock no. 278-578
    1 Bag of 100
    R 650,97
    RS PRO Plain, M6 Threaded Insert diameter 9mm
    • RS stock no. 206-5483
    1 Bag of 100
    R 225,00
    Results per page
    1
    2
    3
    16

    Related links