INA GE30-DO-2RS 30mm Bore Plain Bearing, 311000N Radial Load Rating, 47mm O.D
- RS stock no.:
- 191-3876
- Mfr. Part No.:
- GE30-DO-2RS
- Manufacturer:
- INA
On back order for despatch 2024/04/23
Not Available for premium delivery
Added
Price (Excl VAT) Each
R 692,55
(exc. VAT)
R 796,43
(inc. VAT)
| Units | Per unit |
| 1 - 4 | R 692,55 |
| 5 - 9 | R 675,24 |
| 10 - 24 | R 654,98 |
| 25 + | R 628,78 |
- RS stock no.:
- 191-3876
- Mfr. Part No.:
- GE30-DO-2RS
- Manufacturer:
- INA
Technical data sheets
Legislation and Compliance
Product Details
Static angular misalignments of the shaft must be compensated, which are caused by mounting inaccuracies and tolerances in the adjacent construction
Very good seals are required in environmental conditions such as dust, contamination, moisture, stone impacts and shocks
Radial insert ball bearings with a cylindrical outer ring are highly suitable where:
A cylindrical housing bore is already present
The outer ring of the bearings is to be located by means of easy-to-fit snap rings
Radial insert ball bearings with a profiled bore are highly suitable where:
Shafts must transmit very high torques
Radial insert ball bearings with a rubber interliner are highly suitable where:
Vibrations and shocks must be supported
Damping of running noise is required
Very good seals are required in environmental conditions such as dust, contamination, moisture, stone impacts and shocks
Radial insert ball bearings with a cylindrical outer ring are highly suitable where:
A cylindrical housing bore is already present
The outer ring of the bearings is to be located by means of easy-to-fit snap rings
Radial insert ball bearings with a profiled bore are highly suitable where:
Shafts must transmit very high torques
Radial insert ball bearings with a rubber interliner are highly suitable where:
Vibrations and shocks must be supported
Damping of running noise is required
Specification
Attribute | Value |
|---|---|
| Bore Size | 30mm |
| Outside Diameter | 47mm |
| Static Radial Load Rating | 311000N |