JSP Particulates Filter Cartridge for use with JSP FORCE8 Respirator Mask BMN750-000-600

For use with Force 8™ Half Mask RS 879-2937
Low profile cover protects the enclosed pleated filter from moisture and foreign objects that could damage the pleats
Bayonet connector
Reduced breathing resistance
With an integrated inhalation valve

High efficiency dust protection
Particulate protection only

High efficiency dust protection
Medium capacity gas / vapour protection

High efficiency dust protection
Low capacity gas / vapour protection

EN143

The JSP filter is a reusable respirator accessory with low profile cover that protects the enclosed pleated filter from moisture and foreign objects that could damage the pleats. It is a bayonet connector.

• Dusts fine
• Half mask respirator
• High efficiency dust protection
• Paint stripping, chemical or heat
• Particulate protection only
• Reduced breathing resistance with an integrated inhalation valve
• Solvent based brush painting

Filtered respirator facemasks are essential PPE for environments where particle ingress can be potentially hazardous to your health, such as gas, vapours or dust. They are often more suitable for heavy-duty tasks than disposable facemasks. These filters are sutiable for;
• Dusts fine
• Water based painting
• Solvent based brush painting
• Rubbing down paint
• Paint stripping, chemical or heat
• White spirit
• Formaldehyde
• Woods (hard and soft)

Correct use of respirators

When it comes to respiratory protection, the correct fitting and testing of your respirator is just as important as selecting the correct respiratory protective equipment for your working conditions. Be sure to follow all pertinent instructions and that health and safety best practice is adhered to at all times. Always be sure to use the correct filters for your environment, and make sure the replacement filters are changed as regularly as is recommended.

• EN143