Microchip , 1-Channel Ethernet Transceiver 32-Pin QFN, KSZ8091RNBCA
- RS stock no.:
- 177-3529
- Mfr. Part No.:
- KSZ8091RNBCA
- Manufacturer:
- Microchip
Temporarily out of stock - back order for despatch when stock is available
Added
Price (Excl VAT) Each (In a Tray of 490)
R 30,111
(exc. VAT)
R 34,628
(inc. VAT)
| Units | Per unit | Per Tray* |
| 490 + | R 30,111 | R 14 754,39 |
| *price indicative | ||
- RS stock no.:
- 177-3529
- Mfr. Part No.:
- KSZ8091RNBCA
- Manufacturer:
- Microchip
Technical data sheets
Legislation and Compliance
- COO (Country of Origin):
- US
Product Details
The KSZ8081 is a single-supply 10Base-T/100Base-TX Ethernet physical-layer transceiver for transmission and reception of data over standard CAT-5 unshielded twisted pair (UTP) cable.
Single-chip 10Base-T/100Base-TX Ethernet transceiver
MII interface support (KSZ8081MNX)
RMII v1.2 Interface support with a 50MHz reference clock output to MAC, and an option to input a 50MHz reference clock (KSZ8081RNB)
RMII back-to-back mode support for a 100Mbps copper repeater
MDC/MDIO management interface for PHY register configuration
Programmable interrupt output
LED outputs for link and activity status indication
On-chip termination resistors for the differential pairs
Baseline wander correction
HP Auto MDI/MDI-X to reliably detect and correct straight-through and crossover cable connections with disable and enable option
Auto-negotiation to automatically select the highest linkup speed
MII interface support (KSZ8081MNX)
RMII v1.2 Interface support with a 50MHz reference clock output to MAC, and an option to input a 50MHz reference clock (KSZ8081RNB)
RMII back-to-back mode support for a 100Mbps copper repeater
MDC/MDIO management interface for PHY register configuration
Programmable interrupt output
LED outputs for link and activity status indication
On-chip termination resistors for the differential pairs
Baseline wander correction
HP Auto MDI/MDI-X to reliably detect and correct straight-through and crossover cable connections with disable and enable option
Auto-negotiation to automatically select the highest linkup speed
Specification
Attribute | Value |
|---|---|
| Number of Channels per Chip | 1 |
| Typical Data Rate | 100Mbit/s |
| Power Supply Type | Single |
| Typical Operating Supply Voltage | 3.3 V |
| Mounting Type | Surface Mount |
| Package Type | QFN |
| Pin Count | 32 |
| Dimensions | 5 x 5 x 0.95mm |
| Maximum Operating Temperature | +70 °C |
| Minimum Operating Temperature | 0 °C |