Fluke TL75-1 Test Lead Kit, CAT III, CAT IV, 10A

Brought to you by Fluke, a range of Test leads and probes, suitable exclusively for Fluke Multimeters. Whether it's a test lead set or a probe set, dependent on the application, both types will add a sense of reliability to the intended application. All models are highly reliable and excellent quality.

• Both test leads and probes available
• Durable connection, which guarantees excellent results
• Single accessories and kits
• Different safety categories to suit the application
• Insulated wires

These leads are connecting cables which are used specifically for Multimeters, attaching a test probe to the end will allow the user to measure the required voltage, current or electrical resistance. As it assists operation with a multimeter, at least two of these types of electrical values are measured.

Connecting to Fluke multimeters, a set of test probes will measure the device or target for an accurate reading, such as voltage or current. Due to the flexibility and quality produced by Fluke, each probe provides much-needed precision.

Need to connect a high-precision probe to your multimeter? Count on this test lead kit from FLUKE. With a sturdy 4mm plug on one end and a PVC-insulated probe on the other, it's an all-in-one measurement solution that saves time and effort in the field. Because it's rated for CAT III, it's a safe choice for general-purpose measurements in a heavy-industrial environment. A right-angled connector reduces strain to help keep this hardy gadget running at peak condition for longer. Thanks to its standard banana plug design, it's widely compatible with your existing devices for ease of use.

• PVC insulator is abrasion-resistant for a long service life
• Generous 1.22m cable length gives you plenty of room to manoeuvre
• Comfort-grip probe handle makes it easy to use
• Shrouded plugs minimise the chances of accidental contact for maximum user safety

• Electrical installations
• Industrial circuit breakers
• Distribution wiring

This test lead kit is rated for CAT III 1000V and CAT IV 600V, so it can withstand surges of up to 8000V.

’Buy a Fluke, Get one Free’ is back!!
Between March 1st, 2024 and August 31st, 2024, the customer spends €150 or more on a qualifying Fluke product (Fluke Industrial, Fluke Calibration, Fluke Networks, or Beha-Amprobe).
Customer claims their tool online at: www.fluke.com/en/freefluke
A proof of purchase in the form of a receipt or invoice is required.
Note: Offer not available in South Africa

EN61010-2-031 CATII 1000V