- RS stock no.:
- 214-8073
- Mfr. Part No.:
- TB67H420FTG(O,EL)
- Manufacturer:
- Toshiba
- RS stock no.:
- 214-8073
- Mfr. Part No.:
- TB67H420FTG(O,EL)
- Manufacturer:
- Toshiba
Technical data sheets
Legislation and Compliance
Product Details
The Toshiba brushed DC motor driver has sense resistor less current control. The internal H-bridge can be controlled independently, as a two brushed DC motor driver or a single stepping motor driver using the dual H-bridge mode. This IC is fabricated with the BiCD process and is rated at 50 V, 9.0 A
Supporting large current (9.0 A) and high voltage (50 V) brushed DC motor operation
Capable of driving two brushed DC motors using dual H-Bridge mode
Capable of driving one stepping motor using dual H-bridge mode
Built-in sense resistor less current control. (ACDS: Advanced Current Detection System)
Low Rds (on) MOSFETs (High side+ Low side=0.33 Ω (typ.))
Error detection features (Thermal shutdown (TSD), Over current detection (ISD), Power-on-reset (POR), and Motor load open detection (OPD))
Error detection signal output (Error Output)
Internal VCC (5 V) regulator enables the driver to be operated with a single power supply (VM)
Adjustable constant current PWM frequency using external components
Small package with thermal pad. (QFN48: 7.0 mm x 7.0 mm)
Capable of driving two brushed DC motors using dual H-Bridge mode
Capable of driving one stepping motor using dual H-bridge mode
Built-in sense resistor less current control. (ACDS: Advanced Current Detection System)
Low Rds (on) MOSFETs (High side+ Low side=0.33 Ω (typ.))
Error detection features (Thermal shutdown (TSD), Over current detection (ISD), Power-on-reset (POR), and Motor load open detection (OPD))
Error detection signal output (Error Output)
Internal VCC (5 V) regulator enables the driver to be operated with a single power supply (VM)
Adjustable constant current PWM frequency using external components
Small package with thermal pad. (QFN48: 7.0 mm x 7.0 mm)
Specification
Attribute | Value |
---|---|
Motor Type | Brushed DC |
Output Configuration | Half Bridge |
Configuration | Dual |
Maximum Output Current | 9A |
Maximum Supply Voltage | 47 V |
Mounting Type | Surface Mount |
Package Type | VQFN |
Pin Count | 48 |