- RS stock no.:
- 121-8570
- Mfr. Part No.:
- SN65LVDS179D
- Manufacturer:
- Texas Instruments
On back order for despatch 2024/07/17
Not Available for premium delivery
Added
Price (Excl VAT) Each (In a Tube of 75)
R 76,917
(exc. VAT)
R 88,455
(inc. VAT)
Units | Per unit | Per Tube* |
75 - 75 | R 76,917 | R 5 768,775 |
150 - 225 | R 74,995 | R 5 624,625 |
300 - 675 | R 72,745 | R 5 455,875 |
750 - 1425 | R 69,835 | R 5 237,625 |
1500 + | R 67,042 | R 5 028,15 |
*price indicative |
- RS stock no.:
- 121-8570
- Mfr. Part No.:
- SN65LVDS179D
- Manufacturer:
- Texas Instruments
Legislation and Compliance
Product Details
LVDS Transceivers, Texas Instruments
The Texas Instruments SN65LVDS179 devices are differential line drivers and receivers that use low-voltage differential signalling (LVDS) to achieve signalling rates as high as 400 Mbps. The TIA/EIA-644 standard-compliant electrical interface provides a minimum differential output voltage magnitude of 247 mV into a 100-Ω load and receipt of 100-mV signals with up to 1 V of ground potential difference between a transmitter and receiver.
Meets or Exceeds the Requirements of ANSI
TIA/EIA-644-1995 Standard
Full-Duplex Signalling Rates up to 150 Mbps
Bus-Pin ESD Exceeds 12 kV
Operates From a Single 3.3-V Supply
Low-Voltage Differential Signalling With Typical
Output Voltages of 350 mV and a 100-Ω Load
Propagation Delay Times
Driver: 1.7 ns Typical
Receiver: 3.7 ns Typical
Power Dissipation at 200 MHz
Driver: 25 mW Typical
Receiver: 60 mW Typical
LVTTL Input Levels Are 5-V Tolerant
Receiver Maintains High Input Impedance With
VCC < 1.5 V
Receiver Has Open-Circuit Fail Safe
TIA/EIA-644-1995 Standard
Full-Duplex Signalling Rates up to 150 Mbps
Bus-Pin ESD Exceeds 12 kV
Operates From a Single 3.3-V Supply
Low-Voltage Differential Signalling With Typical
Output Voltages of 350 mV and a 100-Ω Load
Propagation Delay Times
Driver: 1.7 ns Typical
Receiver: 3.7 ns Typical
Power Dissipation at 200 MHz
Driver: 25 mW Typical
Receiver: 60 mW Typical
LVTTL Input Levels Are 5-V Tolerant
Receiver Maintains High Input Impedance With
VCC < 1.5 V
Receiver Has Open-Circuit Fail Safe
LVDS Communication
Low Voltage Differential Signaling, or LVDS, is an electrical signaling system that can run at very high speeds over cheap, twisted-pair copper cables.
Applications: Firewire, SATA, SCSI
Specification
Attribute | Value |
---|---|
Number of Drivers | 1 |
IC Type | Transceiver IC |
Output Type | Driver, Receiver |
Transmission Data Rate | 400Mbps |
Number of Elements per Chip | 1 |
Mounting Type | Surface Mount |
Package Type | SOIC |
Pin Count | 8 |
Dimensions | 4.9 x 3.91 x 1.58mm |
Height | 1.58mm |
Length | 4.9mm |
Maximum Operating Supply Voltage | 3.6 V |
Maximum Operating Temperature | +85 °C |
Minimum Operating Temperature | -40 °C |
Minimum Operating Supply Voltage | 3 V |
Width | 3.91mm |