DSPIC33EP32MC202-I/SS Microchip, 16bit Digital Signal Processor 140MHz 32 kB Flash 28-Pin SSOP
- RS stock no.:
- 825-1032
- Mfr. Part No.:
- DSPIC33EP32MC202-I/SS
- Manufacturer:
- Microchip
1025 Available from UK/Europe in 4–6 working days for collection or delivery to major cities (Heavy, hazardous or lithium product excluded. Delivery T&C's apply)
Not Available for premium delivery
Added
Price (Excl VAT) Each (In a Pack of 5)
R 40,816
(exc. VAT)
R 46,938
(inc. VAT)
| Units | Per unit | Per Pack* |
| 5 - 45 | R 40,816 | R 204,08 |
| 50 - 120 | R 39,796 | R 198,98 |
| 125 - 245 | R 38,602 | R 193,01 |
| 250 + | R 37,058 | R 185,29 |
| *price indicative | ||
- RS stock no.:
- 825-1032
- Mfr. Part No.:
- DSPIC33EP32MC202-I/SS
- Manufacturer:
- Microchip
Technical data sheets
Legislation and Compliance
Product Details
dsPIC33EPxxxGP/MC20x/50x 16-Bit Digital Signal Controllers
The dsPIC33EPxxxGP/MC20x/50x family of Digital Signal Controllers from Microchip is a comprehensive range of 16-bit DSPs based upon the dsPIC33E core, offering up to 70MIPS performance. The range has an extensive array memory and package variants, all offering a large variety of on board peripherals.
Microcontroller Features
70 MHz Max. CPU Speed
21 to 53 I/O Pins – Model Dependant
Power-On Reset (POR)
Power-Up Timer (PWRT)
Oscillator Start-Up Timer (OST)
Brown-Out Reset (BOR)
Extended Watchdog Timer (WDT)
High/Low-Voltage Detection (HLVD) Module
In-Circuit Serial Programming (ICSP)
In-Circuit Debug (ICD)
21 to 53 I/O Pins – Model Dependant
Power-On Reset (POR)
Power-Up Timer (PWRT)
Oscillator Start-Up Timer (OST)
Brown-Out Reset (BOR)
Extended Watchdog Timer (WDT)
High/Low-Voltage Detection (HLVD) Module
In-Circuit Serial Programming (ICSP)
In-Circuit Debug (ICD)
Peripherals
High-Speed PWM
10/12-Bit Analogue-to-Digital Converter (ADC) - 6 to 16 Channels Depending on Model
Five 16-Bit Timers
Two 32-Bit Timers
Operational Amplifier – 2 to 3 Depending on Model
Comparators – 3 to 4 Depending on Model
Charge Time Measurement Unit (CTMU) – Supports mTouch™ Capacitive Touch Sensing
Two UART Modules
Two SPI Modules
ECAN™ Module
Two I2C™ Modules
Programmable Cyclic Redundancy Check (CRC)
Peripheral Pin Select (PPS)
Peripheral Trigger Generator (PTG)
10/12-Bit Analogue-to-Digital Converter (ADC) - 6 to 16 Channels Depending on Model
Five 16-Bit Timers
Two 32-Bit Timers
Operational Amplifier – 2 to 3 Depending on Model
Comparators – 3 to 4 Depending on Model
Charge Time Measurement Unit (CTMU) – Supports mTouch™ Capacitive Touch Sensing
Two UART Modules
Two SPI Modules
ECAN™ Module
Two I2C™ Modules
Programmable Cyclic Redundancy Check (CRC)
Peripheral Pin Select (PPS)
Peripheral Trigger Generator (PTG)
Specification
Attribute | Value |
|---|---|
| Maximum Frequency | 140MHz |
| Data Bus Width | 16bit |
| RAM Size | 4 kB |
| Instruction Set Architecture | DSP |
| Program Memory Size | 32 kB |
| Program Memory Type | Flash |
| Mounting Type | Surface Mount |
| Package Type | SSOP |
| Pin Count | 28 |
| Typical Operating Supply Voltage | 3 to 3.6 V |
| Number of UART Channels | 2 |
| Number of Ethernet Channels | 0 |
| Number of Timers | 12 |
| Minimum Operating Temperature | -40 °C |
| PWM Resolution | 16bit |
| Number of I2C Channels | 2 |
| Number of PCI Channels | 0 |
| Number of CAN Channels | 0 |
| ADC Channels | 6 |
| Number of ADC Units | 1 |
| Maximum Operating Temperature | +85 °C |
| Number of PWM Units | 4 |
| Length | 10.5mm |
| ADCs | 1(6 x 10 bit)/1(6 x 12 bit) |
| Timer Resolution | 16 bit, 32bit |
| Height | 1.85mm |
| Number of LIN Channels | 0 |
| PWM Channels | 6 |
| Width | 5.6mm |
| Number of USART Channels | 0 |
| Timers | 2 x 32 bit, 5 x 16 bit |
| Dimensions | 10.5 x 5.6 x 1.85mm |
| ADC Resolution | 12 bit, 10bit |
| Pulse Width Modulation | 4 x 16 bit, 6 (Motor Control) |
| Number of SPI Channels | 2 |
| USB Channels | 0 |