Fluke 116 Handheld Digital Multimeter, 600μA ac 600V ac 600μA dc 600V dc

  • RS stock no. 616-1476
  • Mfr. Part No. FLUKE-116 EUR
  • Warranty 3 Year
  • Manufacturer Fluke
Technical data sheets
Legislation and Compliance
Not Applicable
COO (Country of Origin): CN
Product Details

Fluke 16 True RMS HVAC Digital Multimeter with Built-In Thermometer

The Fluke 16 Digital Multimeter is designed to function like a standard Multimeter and exclusive HVAC modes, unlike other models in the Fluke 10 series, the Fluke 116 comes with a built-in thermometer, allowing engineers to measure temperature and microamp mode for testing flame sensors to quickly troubleshoot problems for HVAC applications. The Fluke 116 measures resistance, continuity, frequency and capacitance. The Fluke 116 Multimeter are independently tested for safe use in CAT III 600 V Environments.

Why buy the Fluke 116 Digital Multimeter?

• VoltAlertTM Technology for intergrated non-contact voltage detection
• AutoVolt feature for automatic AC/DC voltage selection
• LoZ: Low input impedance to eliminate stray voltage ensures that ghost voltages don’t have an effect on readings
• Large white LED backlight, perfect for when you’re working in darkened areas
• True RMS meanng it will maintain its accuracy when testing on irregular AC connections
• Min/Max/Average to record signal fluctuations
• Current measurement 20A (30 seconds momentary; 10A continuous)
• Resistance , continuity, frequency and capacitance testing capability

Fluke 116 HVAC Digital Multimeter key benefits?

• Compact, Ergonomic design and can be used with one hand
• Built-in thermometer allows Temperature measurement from -40°C to +400°C using the Type K thermocouple input adaptor
• Capacitance up to 10000μF to test motor start and run capacitors
• Microamp current range for flame sensor measurement down to μA
• 4000 count auto ranging Multimeter
• 40MΩ resistance range
• 33 segment analogue bargrapgh on display
• Diode test
• Continuity test
• V-Check™ mode for safety. Automatically switches from ohm/continuity mode to measure ac or dc volts when voltages above 4.5V are present at the input
• Min/Max recording with elapsed time (ideal for recording signal fluctuations)
• Continuity capture symbolically displays open and short circuits as brief as 250μs
• Meets IEC1010-1 (safety standard) CAT III 600V
• Replacement type K thermocouple available separately accepts other type K thermocouple sensors with subminiature connectors (see accessories)

What are the typical Applications for the Fluke 116 Digital Multimeter?

The Fluke 116 model is built for engineers who work in the HVAC environment (heating, ventilation and air conditioning)

Additional Specification

• DC Voltage Accuracy: 0.5% +2d
• AC Voltage Accuracy: 2.0% +3d
• DC Current Accuracy 1.0% +2d
• AC Current Accuracy 1.5% +3d
• Resistance Accuracy: 1.5% +2d
• Diode Test Range: 2.000V
• Diode Test Resolution: 0.001V
• Diode Test Accuracy: 0.9% +2d
• Capacitance Accuracy: 1.9% +2d
• Temperature Resolution 0.1C
• Temperature Accuracy 1% +10d
• Display Count 6000
• Display Update 4/sec
• Bar Graph Segments 33
• Bar Graph Update 32/sec
• Please note accuracy is specified for 1 year after calibration, at operating temperatures of 18 °C to 28 °C, with relative humidity at 0 % to 95 %."

Does the Fluke 116 come with a warranty?

The Fluke 116 comes with a 3 year warranty giving engineers the peace of mind

Standards

From Fluke, the 116 is designed for heating, ventilation and air conditioning (HVAC) engineers. The model includes temperature measurement and microamp current ranges to quickly troubleshoot HVAC problems.

Buy Fluke products and claim another Fluke product free.
Between September 1, 2020 and December 15, 2020 customer who purchase a Fluke product (inc. Fluke Networks) have the opportunity to claim a free product through the Fluke website with the original proof of purchase, invoice, or receipt. The product can be claimed by visiting the Fluke website -
www.fluke.ie/freefluke (Ireland)
www.fluke.be/freefluke (Belgium)
www.fluke.nl/freefluke (Netherlands)
www/fluke.no/freefluke (Norway)
www.fluke.se/freefluke (Sweden)
www.fluke.com/en/freefluke (South Africa)
There are six levels of free tools to claim. They are separated based on the value of the qualifying purchase, starting at as little as only €100. For each level there is a fixed range of products to claim, based on the value of the original purchase.

Specification
Attribute Value
Multimeter Type Handheld
Absolute Maximum AC Current Measurement 600µA ac
Absolute Maximum DC Current Measurement 600µA dc
Absolute Maximum AC Voltage Measurement 600V ac
Absolute Maximum Resistance Measurement 40MΩ
Absolute Maximum DC Voltage Measurement 600V dc
Absolute Maximum Capacitance Measurement 9.999F
Absolute Maximum Temperature Measurement +400°C
Functions Measured AC Current, AC Voltage, Capacitance, Continuity, DC Current, DC Voltage, Diode, Frequency, Resistance, Temperature
True RMS Yes
Maximum Frequency 1kHz
Display Type LCD
Model Number p 116
DC Current Measurement Resolution 0.1µA
AC Current Measurement Resolution 0.1µA
DC Voltage Measurement Resolution 0.1mV dc
Resistance Measurement Resolution 100mΩ
AC Voltage Measurement Resolution 0.1mV ac
Capacitance Measurement Resolution 1nF
Temperature Measurement Resolution 0.1°C
Battery Life 400 h
Weight 550g
Safety Category Level CAT III
Dimensions 46 x 84 x 167mm
Best Capacitance Measurement Accuracy ±1.9% + 2 Digits
Best Resistance Measurement Accuracy ±1.5% + 2 Digits
Safety Category Voltage 600V
Length 46mm
Best DC Current Accuracy ±1% + 2 Digits
Best Temperature Measurement Accuracy ±1% + 1 °C
Minimum Operating Temperature -10°C
Best DC Voltage Accuracy ±0.5% + 2 Digits
Maximum Operating Temperature +50°C
Height 167mm
Best AC Voltage Accuracy ±1% + 3 Digits
Best AC Current Accuracy ±1.5% + 3 Digits
Battery Type 9V
Width 84mm
Available to back order for despatch 2020/10/20.Please allow 4 to 6 working days for delivery to South Africa
Price (Excl VAT) Each
R 5,250.00
(exc. VAT)
R 6,037.50
(inc. VAT)
units
Per unit
1 +
R 5,250.00