Fluke 83 Handheld Digital Multimeter, 10A ac 1000V ac 10A dc 1000V dc

  • RS stock no. 480-2361
  • Mfr. Part No. FLUKE 83V
  • Manufacturer Fluke
Technical data sheets
Legislation and Compliance
Not Applicable
COO (Country of Origin): US
Product Details

Fluke 83V Digital Multimeter

The Fluke 83V industrial digital multimeter is designed to help identify complex signal problems fast. The 3-3/4 digits digital multimeter features true rms readings which will give you accurate results without the complications. The 83V digital handheld multimeter features the accuracy and resolution to troubleshooting that industrial electricians around the world trust from the control room to the plant floor as well as electro -mechanical equipment in noisy, industrial, high energy environments and high altitude locations. The Fluke 83V digital multimeter also comes with a larger display screen with a bright, two level back light allowing you to view the analogue bar graphs and measurements in a dim working environment.

Features & Benefits

• Accurate measurements of noisy pulse-width modulated AC voltage at the VSD and the motor terminals
• Accurate frequency measurements on VSD
• Built-in thermometer
• Peak Min Max mode captures intermittent as fast as 250 μs
• Easy-to-read large digit display with bright, two-level backlight
• CAT III 1000V, CAT IV 600V safety rated
• Lifetime warranty

The 83V digital multimeter measures

AC/DC voltage & current
Resistance
Voltage frequency
Diodes
Continuity
Capacitance
Temperature
Duty Cycle

Additional specifications

• True RMS AC voltage and current for accurate measurements on non-linear signals
• Selectable filter for accurate voltage and frequency measurements on motor drives
• 0.05% DC accuracy
• 3-3/4 digit mode for precise measurements (6,000 counts)
• Measure up to 1000 V AC and DC
• Measure up to 10 A, 20 A for up to 30 seconds
• Frequency to 200 kHz and % duty cycle
• Resistance, continuity and diode test
• 10,000 μF capacitance range for components and motor caps
• Min/Max-Average recording with Min/Max Alert to capture variations automatically
• Relative mode to remove test lead interference
• Auto and manual ranging for maximum flexibility
• Touch Hold to capture stable readings avoiding noisy signals
• Analogue bar graph for fast changing or unstable signals
• Input Alert provides audible warning against wrong use of input jacks

Does it have auto turn off if left on?

Yes - Automatic power down if left unused when switched on to preserve battery life

Electrical safety

All inputs are updated to the 3rd edition of ANSI/ISA S82.01 and EN61010-1 CAT IV 600 V and CAT III, 1000 V. They can withstand impulses in excess of 8.000 V and reduce risks related to surges and spikes.

Note

For Calibrated articles - Accuracy is specified for 1 year after calibration, at operating temperatures of 18 °C to 28 °C, with relative humidity at 0 % to 90 %

Supplied with

TL75 test leads, AC175 alligator clips, yellow holster, 9V battery, temperature probe, user manual, operators guide

Buy Fluke products and claim another Fluke product free.
Between September 1, 2020 and December 15, 2020 customer who purchase a Fluke product (inc. Fluke Networks) have the opportunity to claim a free product through the Fluke website with the original proof of purchase, invoice, or receipt. The product can be claimed by visiting the Fluke website -
www.fluke.ie/freefluke (Ireland)
www.fluke.be/freefluke (Belgium)
www.fluke.nl/freefluke (Netherlands)
www/fluke.no/freefluke (Norway)
www.fluke.se/freefluke (Sweden)
www.fluke.com/en/freefluke (South Africa)
There are six levels of free tools to claim. They are separated based on the value of the qualifying purchase, starting at as little as only €100. For each level there is a fixed range of products to claim, based on the value of the original purchase.

Specification
Attribute Value
Multimeter Type Handheld
Absolute Maximum AC Current Measurement 10A ac
Absolute Maximum DC Current Measurement 10A dc
Absolute Maximum DC Voltage Measurement 1000V dc
Absolute Maximum AC Voltage Measurement 1000V ac
Absolute Maximum Resistance Measurement 50MΩ
Absolute Maximum Capacitance Measurement 9.999F
Absolute Maximum Temperature Measurement +1090°C
Functions Measured AC Current, AC Voltage, Capacitance, Continuity, DC Current, DC Voltage, Diode, Frequency, Resistance, Temperature
True RMS Yes
Maximum Frequency 20kHz
Model Number p 83
AC Current Measurement Resolution 0.1µA ac
DC Current Measurement Resolution 0.1µA dc
AC Voltage Measurement Resolution 0.1mV ac
DC Voltage Measurement Resolution 0.1mV dc
Resistance Measurement Resolution 100mΩ
Capacitance Measurement Resolution 10nF
Temperature Measurement Resolution 0.1°C
Best Capacitance Measurement Accuracy ±1% + 2 Digits
Minimum Operating Temperature -20°C
Maximum Operating Temperature +55°C
Height 31mm
Safety Category Voltage 664 V, 1000 V
Battery Type 9V
Best Resistance Measurement Accuracy ±1% + 3 Digits
Length 186mm
Best DC Voltage Accuracy ±0.1% + 1 Digit
Battery Life 400 h
Weight 355g
Safety Category Level CAT III, CAT IV
Best DC Current Accuracy ±0.4% + 2 Digits
Best AC Current Accuracy ±1.2% + 2 Digits
Width 86mm
Dimensions 186 x 86 x 31mm
Best Temperature Measurement Accuracy ±1% + 1 °C
Best AC Voltage Accuracy ±1% + 4 Digits
Available to back order for despatch 2020/10/12.Please allow 4 to 6 working days for delivery to South Africa
Price (Excl VAT) Each
R 10,850.00
(exc. VAT)
R 12,477.50
(inc. VAT)
units
Per unit
1 +
R 10,850.00