Phoenix Contact SUBCON-PLUS 18 Way Right Angle Cable Mount D-sub Connector Male to Female, 2.77mm Pitch
- RS stock no.:
- 493-1970
- Mfr. Part No.:
- 2708245
- Manufacturer:
- Phoenix Contact
- RS stock no.:
- 493-1970
- Mfr. Part No.:
- 2708245
- Manufacturer:
- Phoenix Contact
Legislation and Compliance
- COO (Country of Origin):
- DE
Product Details
Phoenix Contact D-Sub Connector, 5V Voltage Rating, 100mA Current Rating - SUBCON-PLUS-PROFIB/PG/SC2 - 2708245
Need a way to bridge the gap between your modern PROFIBUS system and legacy devices? Pick this D-sub connector from Phoenix Contact to complete your setup. It's an easy way to add a port that's primed and ready to accept bus cables running at speeds up to 12Mbps. You can even install this unit right up against the edge of your PCB and swap it from left to right, thanks to the 35° cable entry angle.
You can be sure of long-term service, as this unit will run without failure for 155 years at total capacity, making it a dependable choice. It's also energy-efficient and needs only 0.025W of power to do its job, making it ideal for any system that needs to conserve power. Link this connector to your computer, gaming console or AV equipment to ramp up your system's capabilities.
You can be sure of long-term service, as this unit will run without failure for 155 years at total capacity, making it a dependable choice. It's also energy-efficient and needs only 0.025W of power to do its job, making it ideal for any system that needs to conserve power. Link this connector to your computer, gaming console or AV equipment to ramp up your system's capabilities.
Features & Benefits
Withstands 200 insertion and withdrawal cycles, so it's a long-lasting option
Suits industrial settings, as it performs in -20°C to +75°C temperatures
IP40 rating indicates it's touch-proof and safe to handle
Light 47.8g weight won't put strain on your PCB
Suits industrial settings, as it performs in -20°C to +75°C temperatures
IP40 rating indicates it's touch-proof and safe to handle
Light 47.8g weight won't put strain on your PCB
Note
2708245 SUBCON-PLUS-PROFIB/PG/SC2
BUS connectors
Rewireable bus interface connectors suitable for Bitbus, CAN-Bus, Interbus-S (Fieldbus) and Profibus systems. Compact and high quality, the 9-pole sub-D housings are available in bus node or bus termination versions and are colour-coded for easy identification. Service nodes are also available for CAN-Bus and Profibus systems, allowing online programming and repair. Each interface comes with detailed assembly instructions and mounting accessories.
Available in versions with horizontal or vertical cable outlets
Fast and reliable connection via screw terminals on the PCB
Bus terminations include SMT termination resistors
Colour-coded bodies aid installation and repair
Safe ESD protection thanks to fully insulated housings
Supplied with reliable crimp strain relief
Fast and reliable connection via screw terminals on the PCB
Bus terminations include SMT termination resistors
Colour-coded bodies aid installation and repair
Safe ESD protection thanks to fully insulated housings
Supplied with reliable crimp strain relief
Specification
Attribute | Value |
---|---|
Number of Contacts | 18 |
Gender | Male to Female |
Body Orientation | Right Angle |
Mounting Type | Cable Mount |
Pitch | 2.77mm |
D Connector Type | D-Subminiature Connector |
Termination Method | Screw Terminal |
Current Rating | 100mA |
Housing Material | ABS |
Voltage Rating | 60.0 V |
Length | 58mm |
Width | 39.4mm |
Depth | 16.6mm |
Contact Material | Copper Alloy |
Series | SUBCON-PLUS |
Dimensions | 58 x 16.6 x 39.4mm |
Minimum Operating Temperature | -20°C |
Maximum Operating Temperature | +70°C |