Fluke FLUKE-707EX Current Loop Calibrator 24mA

  • RS stock no. 454-7266
  • Mfr. Part No. FLUKE-707EX
  • Manufacturer Fluke
Technical data sheets
Legislation and Compliance
Not Applicable
COO (Country of Origin): US
Product Details

Fluke 707Ex Intrinsically Safe mA Loop Calibrator

Extremely fast and easy to use, Fluke offers a push-button and knob-base current loop calibrator which is an intrinsically safe instrument for use in potentially explosive environments. Designed for high performance one handed operation, calibration, maintenance, measurement and repairs of current loops, assisting users in working more accurately and efficiently.

A clear large simultaneous mA and % of span display, alongside the simple rotary button allows adjustments and quick selections with one hand. Housed in a robust protective case, the 9V battery can also be changed without breaking the calibration seal.

Features and Benefits:

• -10ºC to 55ºC operating temperature
• Simultaneous mA and % display
• 0-100% span check
• 24 volt internal loop supply
• HART® compatible resistance connected in series with the loop supply for compatibility with HART communicators
• 0.015% mA accuracy
• 1 μA resolution for mA source, simulate, and measure

FAQ's

What is a current loop calibrator?

Current loop calibrators are specially designed instruments for current loop trouble shooting, testing and calibration. They can source current on unpowered devices in a loop, simulate the operation of loop powered transmitters and also measure current. These calibrators often feature time saving technology, specialist graphics using digital interfaces and micro-processor based electronics.

How much current flows in each loop of a parallel circuit?

Determined by Ohm's law, which states that the current between 2 points through a conductor is directly proportionate to the voltage across those 2 points, divided by the resistance of the conductor. I = V/R. This is also the case for series and parallel circuits, however in parallel circuits the total current can be affected by the way the resistors have been connected, as well as their ohmic value. Current does divide up and there can be more current in one area over another nonetheless when all areas are added up the total amount is the same.

Supplied with

Test leads, crocodile clips, manual, holster, 707EX content control drawing and a 9V alkaline battery.

Buy Fluke products and claim another Fluke product free.
Between September 1, 2020 and December 15, 2020 customer who purchase a Fluke product (inc. Fluke Networks) have the opportunity to claim a free product through the Fluke website with the original proof of purchase, invoice, or receipt. The product can be claimed by visiting the Fluke website -
www.fluke.ie/freefluke (Ireland)
www.fluke.be/freefluke (Belgium)
www.fluke.nl/freefluke (Netherlands)
www/fluke.no/freefluke (Norway)
www.fluke.se/freefluke (Sweden)
www.fluke.com/en/freefluke (South Africa)
There are six levels of free tools to claim. They are separated based on the value of the qualifying purchase, starting at as little as only €100. For each level there is a fixed range of products to claim, based on the value of the original purchase.

Specification
Attribute Value
Absolute Maximum Current Measurement 24mA
Best Accuracy ±0.015 %
Resolution 0.001 mA
Battery Type 9 V
Battery Life 18 h
Power Source Battery
Dimensions 152 x 70 x 41mm
Weight 224g
Height 152mm
Length 41mm
Maximum Operating Temperature +55°C
Minimum Operating Temperature -10°C
Width 70mm
Safety Category Level CAT I
Model Number p 707EX
Safety Category Voltage 30V
Hazardous Area Certification ATEX
Available to back order for despatch 2020/10/13.Please allow 4 to 6 working days for delivery to South Africa
Price (Excl VAT) Each
R 29,990.00
(exc. VAT)
R 34,488.50
(inc. VAT)
units
Per unit
1 +
R 29,990.00