- RS stock no.:
- 539-696
- Mfr. Part No.:
- 97 52 14
- Manufacturer:
- Knipex
2 Available from UK/Europe in 4–6 working days for collection or delivery to major cities (Heavy, hazardous or lithium product excluded. Delivery T&C's apply)
Not Available for premium delivery
Added
Price (Excl VAT) Each
R 4 731,78
(exc. VAT)
R 5 441,55
(inc. VAT)
Units | Per unit |
1 + | R 4 731,78 |
- RS stock no.:
- 539-696
- Mfr. Part No.:
- 97 52 14
- Manufacturer:
- Knipex
Technical data sheets
Legislation and Compliance
Non Compliant
- COO (Country of Origin):
- DE
Product Details
Crimping pliers for open barrel terminals from 0.1 to 1.5 mm²
Features and benefits
- Extremely user-friendly crimping pliers with lever transmission
- For non-insulated, open plug connectors (2.8 + 4.8 mm plug width and a capacity of 0.1 - 1.5 mm²)
- Toggle lever system for high efficiency
- Integral lock (with release mechanism) only triggers on reaching the optimal crimping pressure
-Capacities mm² / AWG : for non-insulated open barrel connectors from 0.1 to 1.5 mm² - AWG 27 to 16
- Material: special grade chrome vanadium electric steel, oil-hardened
- For non-insulated, open plug connectors (2.8 + 4.8 mm plug width and a capacity of 0.1 - 1.5 mm²)
- Toggle lever system for high efficiency
- Integral lock (with release mechanism) only triggers on reaching the optimal crimping pressure
-Capacities mm² / AWG : for non-insulated open barrel connectors from 0.1 to 1.5 mm² - AWG 27 to 16
- Material: special grade chrome vanadium electric steel, oil-hardened
Applications types
Crimping pliers can be used in many applications:
- Maintenance and repair
- Electrical installations
- Crimp shop
- Maintenance and repair
- Electrical installations
- Crimp shop
Product Maintenance
- To maintain proper operation and long service life, shafts and other moving parts should be lubricated regularly.
- Lubrication* is recommended at least every 10,000 cycles when the tool is exposed to dirt or other contaminants.
- The setting of the crimping die ranges should also be checked. - Adjustment of the pressure setting pin is necessary when the tool preload decreases significantly.
*Use a light non-mineral oil
- Lubrication* is recommended at least every 10,000 cycles when the tool is exposed to dirt or other contaminants.
- The setting of the crimping die ranges should also be checked. - Adjustment of the pressure setting pin is necessary when the tool preload decreases significantly.
*Use a light non-mineral oil
Specification
Attribute | Value |
---|---|
Crimp Connector Type | Open Barrel Terminal |
Crimp Tool Type | Crimping Tool |
Operation | Hand |
Wire Size mm² | 0.1 → 1.5mm² |
Wire Size AWG | 26 → 16AWG |
Ratcheting | Yes |
Overall Length | 195 mm |
Connector Type | Open-barrel terminal |