Schneider Electric LC1D Series Contactor, 220 V ac Coil, 3-Pole, 25 A, 11 kW, 3NO, 690 V ac

TeSys D Contactors from Schneider Electric combine long mechanical and electrical life to offer a high reliable contactor. The range has been designed for integration in control systems and can be used to create motor starters for any type of application. The TeSys D contactors offer quick simple setup while maintaining compliance with international standards.

• Built-in auxiliary contacts for added switching capability
• Screw connections: IP20 finger-safe terminals with both North American and International terminal markings
• Can be panel mounted with screws or DIN Rail mounted
• Bidirectional peak limiting diode suppressor to protect the coil
• Easily installed accessories
• Flexible control circuit to suit a wide range of applications

Contactor utilisation categories define the current making and breaking values, based on the type of load to be controlled and the operating cycle conditions.

• AC-1: This applies to all AC devices with a power factor of at least 0.95. Example of use: resistive load, heating, distribution.


• AC-3: This applies to squirrel cage motors where breaking occurs while the motor is running. Example of use: all squirrel cage motors, lifts, escalators, conveyors, bucket elevators, compressors, pumps, mixers, air conditioning units.

• Auxiliary contact blocks with serrated wiping action
• Front mount dust tight auxiliary contact blocks
• Pneumatic time delay blocks
• Transient voltage surge suppressors
• Interface modules and electronic timers
• Mechanical latching blocks

Yes the Tesys D range uses linear translation movement that provides double breaking of the poles.

Switch up your circuit protection with the help of this contactor from Schneider Electric. You can use it to turn the power supply on and off to individual circuits, for complete control over industrial motors. As the unit has three poles, it safely handles up to three separate circuits at once. A pair of auxiliary contacts provides extra switching support as needed. This versatile component is a cinch to mount, whether you clip it onto a standard DIN rail or screw-mount it to your panel.

• Compact dimensions of 85 (L) x 45 (W) x 90mm (D) ensure it slots neatly into crowded setups
• IP20 rating indicates it's finger-safe and protected against objects over 12mm
• 11kW power rating for use with heavy-duty installations
• Light weight of 370g won't put a strain on your systems
• Thermoplastic housing is resistant to heat and corrosion to support a long service life

• Print and paper manufacturing
• Automotive parts processing
• Steel mills

With a 25A current rating, the unit is compatible with high power loads in demanding industrial settings.