Recently searched

    XinaBox xCHIP Wi-Fi & Bluetooth Core Module CW02

    RS stock no.:
    Mfr. Part No.:
    View this category
    Discontinued product
    RS stock no.:
    Mfr. Part No.:
    COO (Country of Origin):

    Technical data sheets

    Legislation and Compliance

    COO (Country of Origin):

    Product Details

    xChip Boards

    xChips are a rapid electronics development ecosystem to help reduce development time and simplify making custom products as well as aiding learning. Without soldering, wiring, breadboarding, or hardware knowledge you can assemble a circuit in minutes, and concentrate on coding.

    xChips are compatible with the platform you want to use and bridges are available for the most popular pltatforms; Raspberry Pi, Minnowboard, Beaglebone, Micro:bit, Pixhawk and 96 boards. Rather than bridging to Ardunio, we offer compatible cores for Arduino Uno, the CC01, and for Arduino Zero, the CC03.

    xChips utilise I2C, and due to this bus architecture, unlimited expansion of circuits is possible. Limitations of I2C addresses have been negated by development multiplexers.

    Because of its simple connection method, it is easy to build quickly - for prototyping and small product runs

    xChips connect to each other using an xBus connector, available from RS 174-4977.

    Some xChips need an xPDI connector (RS 174-4974) to connect to programming interfaces, such as the IP02 or IP03.

    CW02 – Wi-Fi & Bluetooth Core (ESP32/ESP32-WROOM-32/ESP-WROOM-32)

    This xChip is a core Wi-Fi module, based on the ESP32 produced by Espressif Systems, which is a single 2.4 GHz Wi-Fi and dual-mode Bluetooth combo chip designed with TSMC ultra-low-power 40 nm technology and Tensilica Xtensa Dual-core 32-bit LX6 microprocessor, with a clock rate of up to 240 MHz.

    The ESP32 is highly integrated with built-in antenna switches, RF balun, power amplifier, low-noise receive amplifier, filters, and power management modules. Engineered for mobile devices, wearable electronics, and IoT applications, ESP32 achieves ultra-low power consumption through power saving features including fine resolution clock gating, multiple power modes, and dynamic power scaling.

    Product Features

    ● Based on ESP-WROOM-32
    ● 2.4 GHz Wi-Fi and Bluetooth
    ● 4 MB SPI memory
    ● Arduino, Mongoose OS, NodeMCU and Lua compatible
    ● OTA capable through Wi-Fi
    ● Supports WPA personal and enterprise
    ● RGB LED


    ● Internet-of-Things sensing and control applications
    ● Wireless sensing
    ● Mobile application control

    Product Specifications

    RF certification: FCC/CE/IC/TELEC/KCC/SRRC/NCC

    Wi-Fi modes: Station/SoftAP/SoftAP+Station/P2P
    Wi-Fi security: WPA/WPA2/WPA2-Enterprise/WPS
    Encryption: AES/RSA/ECC/SHA
    Wi-Fi OTA capable
    Network protocols: IPv4, IPv6, SSL, TCP/UDP/HTTP/FTP/MQTT

    WiFi Protocols

    ● 802.11 b/g/n/e/I (802.11n up to 150 Mbps)
    ● A-MPDU and A-MSDU aggregation and 0.4 μs guard interval support


    Protocols: Bluetooth v4.2 BR/EDR and BLE specification


    ● NZIF receiver with -97 dBm sensitivity
    ● Class-1, class-2 and class-3 transmitter
    ● AFH
    ● Built-board PCB antenna
    ● Processor: L106 32-bit RISC microprocessor core based on the Tensilica Xtensa Diamond Standard 106Micro running at 80 MHz.
    ● External QSPI flash: 4 MB
    ● On-board hall sensor and temperature sensor

    Xinabox Modular Prototyping Boards


    Kit ClassificationModule
    Kit NamexCHIP Wi-Fi & Bluetooth Core
    Discontinued product