SKF FRB 11/120 Locating Ring -, 55mm ID
- RS stock no.:
- 506-860
- Mfr. Part No.:
- FRB 11/120
- Manufacturer:
- SKF
Discontinued product
- RS stock no.:
- 506-860
- Mfr. Part No.:
- FRB 11/120
- Manufacturer:
- SKF
Technical data sheets
Legislation and Compliance
Not Applicable
- COO (Country of Origin):
- SE
Product Details
Locating Ring for Plummer Housings
The bearing seating in the housing is sufficiently wide to enable the bearing to be displaced axially
Bearings which are to locate a shaft axially in both directions (locating bearings) must always be fixed axially in position in the housing bore by locating rings at both sides
The locating rings are identified by the prefix FRB followed by figures giving the width/outside diameter in millimetres, e.g. FRB 12.5/130
Bearings which are to locate a shaft axially in both directions (locating bearings) must always be fixed axially in position in the housing bore by locating rings at both sides
The locating rings are identified by the prefix FRB followed by figures giving the width/outside diameter in millimetres, e.g. FRB 12.5/130
Plummer Blocks, Bearing Lubrication and Accessories
Specification
Attribute | Value |
|---|---|
| Inside Diameter | 55mm |
| Material | Cast Iron |
| Centre Height | 70mm |
| Mount Hole Size | 16 mm |
| Length | 255mm |
| Depth | 95mm |
| Overall Height | 128mm |
| Mount Hole Centre-to-Centre | 210mm |