RS PRO 64, 96 Way DIN 41612 Eurocard Motherboard FR4 Single Sided 84HP With 20.32mm Connector Pitch
- RS stock no.:
- 110-2444
- Manufacturer:
- RS PRO
1 Available from UK/Europe in 4–6 working days for collection or delivery to major cities (Heavy, hazardous or lithium product excluded. Delivery T&C's apply)
Not Available for premium delivery
Added
Price (Excl VAT) Each
R 3 503,74
(exc. VAT)
R 4 029,30
(inc. VAT)
| Units | Per unit |
| 1 - 4 | R 3 503,74 |
| 5 - 9 | R 3 416,15 |
| 10 - 39 | R 3 313,67 |
| 40 + | R 3 181,12 |
- RS stock no.:
- 110-2444
- Manufacturer:
- RS PRO
Technical data sheets
Legislation and Compliance
- COO (Country of Origin):
- GB
Product Details
Microbus with earth plane
This Microbus is designed for use with DIN 41612 64 // 96 or 96 // 96 connectors.
Pins 1 and 32 on rows a and l are for 0 V with full 0 V display panel on one side of the plate. Pins 2 and 31 on rows a and c are for Vdc, which therefore clears 56 separate signalling lines.
The width of the plate is from 42 → 84 E.
The female 64 // 96 and 96 // 96 solder or wrap connectors are ordered separately.
High reliability thanks to the metal holes.
Minimum crosstalk.
DIN 41494 (KM6-II) compatible.
Protective lacquer to prevent solder bridges.
Pins 1 and 32 on rows a and l are for 0 V with full 0 V display panel on one side of the plate. Pins 2 and 31 on rows a and c are for Vdc, which therefore clears 56 separate signalling lines.
The width of the plate is from 42 → 84 E.
The female 64 // 96 and 96 // 96 solder or wrap connectors are ordered separately.
High reliability thanks to the metal holes.
Minimum crosstalk.
DIN 41494 (KM6-II) compatible.
Protective lacquer to prevent solder bridges.
PC / VME Bus Boards
PC Compatible Prototyping Boards
Prototyping boards manufactured from epoxy glass material to BS 4584 part 3 or 16. Card thickness is 1.6 mm. Copper is 305 g/m² (1 oz/ft²). Edge connector fingers are gold plated to a thickness of 1.5 microns. 1.0 mm (0.040 in.). Diameter holes are pre-drilled on a 2.54 mm (0.1 in.) matrix.
Microboard Pattern
Incorporates, on the component side of the card, a colander ground plane for maximum screening and glitch free high speed operation, and complete solder mask protection.
Specification
Attribute | Value |
|---|---|
| Connection | DIN 41612 |
| Number of Contacts | 64, 96 |
| Base Material | Epoxy Glass Fabric Laminate |
| Number of Sides | 1 |
| Height | 128.6mm |
| Horizontal Pitch | 84HP |
| Thickness | 1.6mm |
| Pitch | 20.32mm |
| Copper Thickness | 35µm |