- RS stock no.:
- 110-1986
- Mfr. Part No.:
- OBS001
- Manufacturer:
- Ultimaker
12 Available from UK/Europe in 4–6 working days for collection or delivery to major cities (Heavy, hazardous or lithium product excluded. Delivery T&C's apply)
Not Available for premium delivery
Added
Price (Excl VAT) Each
R 1 025,52
(exc. VAT)
R 1 179,35
(inc. VAT)
Units | Per unit |
1 + | R 1 025,52 |
- RS stock no.:
- 110-1986
- Mfr. Part No.:
- OBS001
- Manufacturer:
- Ultimaker
Legislation and Compliance
Not Applicable
- COO (Country of Origin):
- NL
Product Details
Ultimaker 2 Jet Nozzle - Stainless Steel
The Olsson block Stainless Steel Jet nozzle has a special tip angle and shoulder width, it also has a special internal geometry with an angle less steep down to the nozzle hole. A special treatment applied inside also makes them slip more. You can print 3°C to 5°C lower because of this treatment, and is also useful for oozing and drips.
With this special stainless steel nozzle, you can print faster, the plastic flows much more easier than in classic nozzles. You can also clean it efficiently with cold pulls (or atomic pulls). The geometry of the inside makes it easier to get rid of plastic so changing colours or filament type is done faster and safer
With this special stainless steel nozzle, you can print faster, the plastic flows much more easier than in classic nozzles. You can also clean it efficiently with cold pulls (or atomic pulls). The geometry of the inside makes it easier to get rid of plastic so changing colours or filament type is done faster and safer
If you print with abbrasive material like Carbon filled filament or Glowfill, this is the nozzle to have! Stainless steel is much stronger, it will wear down much slower than classic brass nozzles which can wear out during one long print! Only thing to remember is to print a little slower because of the difference in conductivity between stainless steel and brass
Note
This nozzle is compatible with M6 Threads, you can put it on the Ultimaker Original (the fan shroud must be modified) or any of the Ultimaker family that has the Olsson Block mounted.
Ultimaker Accessories
Specification
Attribute | Value |
---|---|
Product Type | Nozzle |
For Use With | Olsson Block, Ultimaker 2+ |
Nozzle Material | Stainless Steel |
Nozzle Size | 0.5mm |
- RS stock no.:
- 110-1986
- Mfr. Part No.:
- OBS001
- Manufacturer:
- Ultimaker
Not Applicable
- COO (Country of Origin):
- NL