Punch Sets

Punch sets are ideal for punching neat holes in a variety of materials. Whether in textiles, woodworking or metal working, a set of punch tools allows the operator to drive objects into the material, or form an impression on a work piece.
Sharp at one end, and hardened and flat at the other, a punch can be used with a hammer to achieve the desired results.
The RS range of punch sets includes several different types to suit your needs.
Centre Punch
A common type of punch with a semi blunted end. This is typically used to mark a ’centre’ for drilling in a piece. By creating a small recess for the drill bit to rest in, the drill is assured a greater chance of staying on course.
Drift Punch
Sometimes referred to as a pokey, this punch tool is often used for enlarging preciously made holes. It can also be used for aligning holes prior to bolting.
Parallel Pin Punch
A parallel pin punch is often employed to remove pins from mechanical assemblies. When a pin is too tight to remove by hand, the correctly sized parallel pin punch can be employed to drive it loose.
Spring Pin Punch
Spring pin punches are used for removing roll pins, a type of mechanical fastener. For this reason, spring pin punches are also called roll pin punches, and are specially shaped to remove roll pins without causing damage or becoming jammed.
Wad Punch
Wad punches have interchangeable heads and are used to cut accurate circles into textile materials. They can even be used on thin metal to make washers.
Anti-Vibration
With shock absorbing rubber handle, this punch not only offers the user maximum safety and comfort, but also prevents clipping.

...
Read more Read less

Filters

Viewing 1 - 20 of 65 products
Results per page
Description Price Overall Length Shank Diameter Number of Pieces Point Angle Punch Type
RS stock no. 125-3901
Mfr. Part No.316D
BrandGedore
R 470.72
Each
units
- 3 mm, 4 mm, 5 mm, 6 mm, 8 mm, 10 mm 6 - Parallel Pin
RS stock no. 541-7223
BrandRS PRO
R 561.47
Each
units
- - 10 - Wad
RS stock no. 772-4390
Mfr. Part No.116 A
BrandGedore
R 927.07
Each
units
150 mm 10 mm 6 - -
RS stock no. 452-9634
Mfr. Part No.217.GJ1
BrandFacom
R 2,325.38
1 Box of 1
Box(es)
60; 40; 100; 20; 20 mm Steel Tips: 10; 12; 14; 16; 18: Brass Tips: 12; 16; 20: Polyamide Tips: 12; 16; 20: Brass Tips For Extension: 12; 16; 18; Polyamide Tip For Extension: 12; 16; 18 mm 19 - Anti-Vibration
RS stock no. 733-738
Mfr. Part No.351WRS
BrandEclipse
R 354.08
1 Set
Set(s)
100 mm - 4 - Centre
RS stock no. 772-4396
Mfr. Part No.119L
BrandGedore
R 1,061.17
Each
units
175 mm - 6 - -
RS stock no. 282-805
Mfr. Part No.J46
R 4,028.95
Each
units
4 3/4 → 10 in 3/16 → 7/8 in 26 - -
RS stock no. 530-722
Mfr. Part No.MODM.CG
BrandFacom
R 2,272.69
Each
units
- Drift Punches: 2; 3; 4; 5; 6; 8; Nail Punches: 4; 5; 6; 8 mm 11 - -
RS stock no. 772-4400
Mfr. Part No.106 D
BrandGedore
R 888.37
Each
units
150 mm 10 mm 6 60° -
RS stock no. 510-153
Mfr. Part No.DX620
BrandStarrett
R 598.76
Each
units
89 mm - 5 - -
RS stock no. 265-5113
Mfr. Part No.0-58-930
BrandStanley
R 280.25
1 Set
Set(s)
127 mm - 3 - -
RS stock no. 220-0662
Mfr. Part No.249.GPB
BrandFacom
R 863.55
1 Set
Set(s)
55 mm - 5 - Anti-Vibration
RS stock no. 494-076
Mfr. Part No.4-18-299
BrandStanley
R 715.42
Each
units
Starter Punch: 140; Centre Punch: 101; 114; Pin Punch: 152; Cold Chisel: 141; 152; 171 mm - 12 - -
RS stock no. 456-3634
BrandRS PRO
R 379.86
1 Set
Set(s)
Flat Cold Chisel: 150; Flat Cold Chisel: 125; Crosscut chisel: 125 mm Centre Punch: 4; Taper Punch: 3; Taper Punch: 4 mm 6 - -
RS stock no. 626-1497
BrandRS PRO
R 276.84
Each
units
40 mm, 50 mm 2 mm, 3 mm, 4 mm, 5 mm, 6 mm, 8 mm 6 - Drift
RS stock no. 281-3527
Mfr. Part No.249.G
BrandFacom
R 862.54
Each
units
55 mm - 5 - Anti-Vibration
RS stock no. 875-4752
BrandRS PRO
R 304.93
Each
units
105 mm - 5 - Centre
RS stock no. 381-4903
BrandRS PRO
R 582.34
1 Set
Set(s)
4 in 1/16 in, 1/4 in, 1/8 in, 3/16 in, 3/32 in, 5/16 in, 5/32 in, 7/32 in 8 - Parallel Pin
RS stock no. 264-2426
Mfr. Part No.47A
BrandStanley
R 964.30
1 Set
Set(s)
4-3/8; 4-13/16; 5-1/4; 5-9/16; 5-7/8; 6-3/8; 6-3/4 in 1/4; 1/4; 5/16; 5/16; 3/8; 7/16; 1/2 in 7 - -
RS stock no. 505-8688
BrandRS PRO
R 370.02
Each
units
150 mm - 6 - Parallel Pin