Fuse Holders & Accessories

We offer a superb range of fuse holders and accessories for domestic and commercial use from a range of brands including Schurter, Littelfuse, Cooper Bussmann and Mersen.

What is a fuse holder?

A fuse holder is a casing or housing into which fuses are inserted, simply to hold the fuse in place in order to fulfill its function. They come in many shapes, colours and sizes depending on where they need to be installed.

What types of fuse holder are available?

You will find the following types on the site:

  • Base mount: enables the base of the holder to be attached to something with holes for screws
  • Bottle fuse: a holder for cylindrical bottle fuses, usually with a cap to complete the circuit
  • Inline: a housing for a fuse in a wire or cable, usually for safety purposes
  • Panel mount: another housing with a screw cap that can be mounted into a panel for easy access to the fuse
  • Rail mount: a holder that contains fuses that are slotted into sets with metal contacts

We also stock fuse blocks, clips, switches and covers as well as PCB mounts and other types of accessories.

Why do fuse holders melt?

A fuse holder making poor contact with a fuse can be the cause of this, that is if the fuse has not blown. Current flowing through the electrical circuit, below the fuse's rating, will cause heat from the resistance. This can generate enough heat to cause the fuse holder to melt. It may not be immediate and can happen suddenly after installation.

How do I clean a fuse holder?

  • Ideally wear gloves, either rubber or plastic
  • Ensure the mains power is off and there are no live wires
  • Use a dry cloth or toothbrush to clean the connector springs
  • A small piece of emery cloth wrapped around a screwdriver can be used to scrub the inside of the fuse holder itself
  • Use a small paintbrush to apply lubricant to all areas of the fuse holder once cleaned
Fuse Blocks
Fuse Blocks
Fuse Clips
Fuse Clips
Fuse Covers
Fuse Covers
Fuse Holder Accessories
Fuse Holder Accessories
Fuse Holders
Fuse Holders
Fuse Pullers & Testers
Fuse Pullers & Testers
Neutral Links
Neutral Links
Solid Links
Solid Links

1760 Products showing for Fuse Holders & Accessories

Sort by
86 of 88
Temporarily out of stock
Eaton 30A Panel Mount Fuse Holder for 6.3 x 32 mm, 480V
  • RS stock no. 225-8216
  • Mfr. Part No. BK-HVP-HH-R
Subtotal (1 bag of 100 units)
R 10 286,91(exc. VAT)
R 10 286,91/bag
In Stock
Siemens 50A Rail Mount Fuse Holder for 14 x 51 mm, 2P-Pole, 690V
  • RS stock no. 225-5423
  • Mfr. Part No. 3NW7121
Subtotal (1 unit)
R 1 122,04(exc. VAT)
R 1 122,04/unit
Temporarily out of stock
Eaton 100A Rail Mount Fuse Holder, 1P-Pole, 690V ac
  • RS stock no. 182-1512
  • Mfr. Part No. RS100HWH
Subtotal (1 box of 5 units)
R 10 317,52(exc. VAT)
R 2 063,504/unit
Temporarily out of stock
Wurth Elektronik 10A Panel Mount Fuse Holder, 1P-Pole for Mini, 250V ac
  • RS stock no. 893-0612
  • Mfr. Part No. 696310001002
Subtotal (1 pack of 5 units)
R 171,06(exc. VAT)
R 34,212/unit
Stocked by manufacturer
Eaton 15A 0.001 x 0.001 in Fuse Block, 600V
  • RS stock no. 229-095
  • Mfr. Part No. BG3011SQ
Subtotal (1 pack of 10 units)
R 5 260,36(exc. VAT)
R 5 260,36/pack
Stocked by manufacturer
Siemens 16A Base Mount Fuse Holder, 1P-Pole for D01, 400V
  • RS stock no. 156-047
  • Mfr. Part No. 5SG1302-1
Subtotal (1 pack of 15 units)
R 9 191,39(exc. VAT)
R 9 191,39/pack
In Stock
Littelfuse 16A Panel Mount Fuse Holder for 6.3 x 32 mm, 250
  • RS stock no. 769-0164
  • Mfr. Part No. 80000000005
Subtotal (1 pack of 5 units)
R 235,73(exc. VAT)
R 47,146/unit
Temporarily out of stock
Eaton 1.25kA Base Mount Fuse Holder, 1P-Pole, 1kV
  • RS stock no. 182-1372
  • Mfr. Part No. 170H3004
Subtotal (1 unit)
R 5 534,23(exc. VAT)
R 5 534,23/unit
Stocked by manufacturer
Schneider Electric Accessory Fuse Holder
  • RS stock no. 781-745
  • Mfr. Part No. DF10AP
Subtotal (1 pack of 12 units)
R 359,06(exc. VAT)
R 359,06/pack
Temporarily out of stock
Eaton 35A, 60 A 6.3 x 32 mm, Panel Ferrule Fuse Block, 600V
  • RS stock no. 182-1697
  • Mfr. Part No. JM60060-3CR
Subtotal (1 unit)
R 3 566,89(exc. VAT)
R 3 566,89/unit
Currently unavailable
Sato Parts F-700 Series Polycarbonate Fuse Cover
  • RS stock no. 229-4970
  • Mfr. Part No. F-700-FC2
Subtotal (1 unit)
R 44,82(exc. VAT)
R 44,82/unit
Temporarily out of stock
Eaton 30A Rail Mount Fuse Holder, 3P-Pole, 600V ac
  • RS stock no. 182-1446
  • Mfr. Part No. CHCC3DU
Subtotal (1 box of 4 units)
R 1 920,08(exc. VAT)
R 480,02/unit
Temporarily out of stock
Wickmann 656 Series Fuse Cover, UL/CSA, VDE 40001499
  • RS stock no. 174-0283
  • Mfr. Part No. 65900000009
Subtotal (1 box of 100 units)
R 2 307,00(exc. VAT)
R 23,07/unit
In Stock
Siemens Fuse Holder Accessory NEOZED Screw Cap
  • RS stock no. 202-7069
  • Mfr. Part No. 5SH4316
Subtotal (1 pack of 20 units)
R 1 975,70(exc. VAT)
R 98,785/unit
In Stock
RS PRO 10A Panel Mount Fuse Holder, 1P-Pole for 5 x 20 mm, 250V ac
  • RS stock no. 277-3917
Subtotal (1 pack of 5 units)
R 325,24(exc. VAT)
R 65,048/unit
Stocked by manufacturer
Siemens 20A Fuse Holder, 3P-Pole for 8 x 32 mm, 400V
  • RS stock no. 300-035
  • Mfr. Part No. 3NW7364
Subtotal (1 unit)
R 1 017,70(exc. VAT)
R 1 017,70/unit
Stocked by manufacturer
Eaton 400A Fuse Holder, 3P-Pole for 162 x 103 x 675 mm, 690V ac
  • RS stock no. 262-620
  • Mfr. Part No. EBF2330M1
Subtotal (1 unit)
R 3 844,18(exc. VAT)
R 3 844,18/unit
Stocked by manufacturer
Eaton 400A Fuse Holder, 3P-Pole for 190 x 103 x 715 mm, 690V ac
  • RS stock no. 261-322
  • Mfr. Part No. EBF2330W1
Subtotal (1 unit)
R 4 775,06(exc. VAT)
R 4 775,06/unit
In Stock
TE Connectivity 30A Rail Mount Fuse Holder
  • RS stock no. 299-076
  • Mfr. Part No. 1SNF100022R0000
Subtotal (1 unit)
R 138,09(exc. VAT)
R 138,09/unit
Stocked by manufacturer
Siemens 20A Fuse Holder, 1P-Pole for 8 x 32 mm, 400V
  • RS stock no. 300-034
  • Mfr. Part No. 3NW7353
Subtotal (1 unit)
R 337,56(exc. VAT)
R 337,56/unit
1
86
87
88
Results per page

Related links