Fuse Holders & Accessories

We offer a superb range of fuse holders and accessories for domestic and commercial use from a range of brands including Schurter, Littelfuse, Cooper Bussmann and Mersen.

What is a fuse holder?

A fuse holder is a casing or housing into which fuses are inserted, simply to hold the fuse in place in order to fulfill its function. They come in many shapes, colours and sizes depending on where they need to be installed.

What types of fuse holder are available?

You will find the following types on the site:

  • Base mount: enables the base of the holder to be attached to something with holes for screws
  • Bottle fuse: a holder for cylindrical bottle fuses, usually with a cap to complete the circuit
  • Inline: a housing for a fuse in a wire or cable, usually for safety purposes
  • Panel mount: another housing with a screw cap that can be mounted into a panel for easy access to the fuse
  • Rail mount: a holder that contains fuses that are slotted into sets with metal contacts

We also stock fuse blocks, clips, switches and covers as well as PCB mounts and other types of accessories.

Why do fuse holders melt?

A fuse holder making poor contact with a fuse can be the cause of this, that is if the fuse has not blown. Current flowing through the electrical circuit, below the fuse's rating, will cause heat from the resistance. This can generate enough heat to cause the fuse holder to melt. It may not be immediate and can happen suddenly after installation.

How do I clean a fuse holder?

  • Ideally wear gloves, either rubber or plastic
  • Ensure the mains power is off and there are no live wires
  • Use a dry cloth or toothbrush to clean the connector springs
  • A small piece of emery cloth wrapped around a screwdriver can be used to scrub the inside of the fuse holder itself
  • Use a small paintbrush to apply lubricant to all areas of the fuse holder once cleaned
Fuse Blocks
Fuse Blocks
Fuse Clips
Fuse Clips
Fuse Covers
Fuse Covers
Fuse Holder Accessories
Fuse Holder Accessories
Fuse Holders
Fuse Holders
Fuse Pullers & Testers
Fuse Pullers & Testers
Neutral Links
Neutral Links
Solid Links
Solid Links

1760 Products showing for Fuse Holders & Accessories

Sort by
85 of 88
Temporarily out of stock
Eaton 10A Panel Mount Fuse Holder for 5 x 20 mm, 250V ac
  • RS stock no. 233-0584
  • Mfr. Part No. BK2-HTC-607M
Subtotal (1 box of 2000 units)
R 62 306,46(exc. VAT)
R 62 306,46/box
Stocked by manufacturer
Eaton 32A Base Mount Fuse Holder, 1P-Pole for 81 x 90 x 26 mm, 550V
  • RS stock no. 228-737
  • Mfr. Part No. 32NNSBS 32A 550V FUSEHOLDER 10 1.5KG
Subtotal (1 pack of 10 units)
R 3 320,80(exc. VAT)
R 3 320,80/pack
In Stock
Eaton 32A Rail Mount Fuse Holder for 10 x 38 mm, 2P-Pole, 690V ac
  • RS stock no. 765-2945
  • Mfr. Part No. CHM2DU
Subtotal (1 unit)
R 299,60(exc. VAT)
R 299,60/unit
In Stock
Lovato Electric 32A Rail Mount Fuse Holder for 10 x 38 mm, 3P-Pole, 690V ac
  • RS stock no. 188-1621
  • Mfr. Part No. FB01F3P
Subtotal (1 unit)
R 452,09(exc. VAT)
R 452,09/unit
Stocked by manufacturer
Eaton 160A Fuse Holder, 3P-Pole for NH000/NH00 Fuse
  • RS stock no. 127-220
  • Mfr. Part No. 183030 XNH00-FCE-A160-BT
Subtotal (1 unit)
R 12 866,30(exc. VAT)
R 12 866,30/unit
Currently unavailable
Schurter 16A PCB Mount Fuse Holder for 6.3 x 32 mm, 500V ac
  • RS stock no. 173-7976
  • Mfr. Part No. 0031.2520
Subtotal (1 box of 25 units)
R 5 770,10(exc. VAT)
R 230,804/unit
In Stock
Penta Stand for Fuse Stand for MV Fuse
  • RS stock no. 253-9431
  • Mfr. Part No. TB11D
Subtotal (1 unit)
R 1 132,54(exc. VAT)
R 1 132,54/unit
Temporarily out of stock
Eaton Fuse Holder Accessory Microswitch
  • RS stock no. 182-1349
  • Mfr. Part No. 170H0099
Subtotal (1 box of 10 units)
R 16 412,62(exc. VAT)
R 1 641,262/unit
In Stock
Schurter 30A Rail Mount Fuse Holder for 10.3 x 38 mm, 1P-Pole, 1kV
  • RS stock no. 712-4793P
  • Mfr. Part No. 0091.0001
Subtotal 1 unit (supplied in a box)
R 339,54(exc. VAT)
R 339,54/unit
Temporarily out of stock
Eaton 25A 6.3 x 32 mm, Panel Cartridge Fuse Block, 250V ac
  • RS stock no. 233-0600
  • Mfr. Part No. BK2-S-4202-1D-R
Subtotal (1 pack of 10 units)
R 284,33(exc. VAT)
R 28,433/unit
In Stock
Schurter 30A Rail Mount Fuse Holder for 10 x 38 mm, 2P-Pole, 600V ac
  • RS stock no. 712-4796P
  • Mfr. Part No. 0091.0002
Subtotal 1 unit (supplied in a box)
R 638,01(exc. VAT)
R 638,01/unit
Stocked by manufacturer
Eaton QSA Series Fuse Cover, CE
  • RS stock no. 244-858
  • Mfr. Part No. 1318476 QSAFCOVER160N1
Subtotal (1 unit)
R 2 055,47(exc. VAT)
R 2 055,47/unit
In Stock
RS PRO 10A Panel Mount Fuse Holder, 1P-Pole for 5 x 20 mm, 250V ac
  • RS stock no. 277-3907
Subtotal (1 pack of 5 units)
R 247,21(exc. VAT)
R 49,442/unit
Temporarily out of stock
WAGO 30A Fuse Holder, 1P-Pole, 600V ac
  • RS stock no. 279-1654
  • Mfr. Part No. 811-410
Subtotal (1 unit)
R 327,62(exc. VAT)
R 327,62/unit
In Stock
Hager 50A Rail Mount Fuse Holder, 1P-Pole, 690V ac
  • RS stock no. 144-4537
  • Mfr. Part No. LS601
Subtotal (1 unit)
R 583,36(exc. VAT)
R 583,36/unit
Temporarily out of stock
Eaton 15A In-line Fuse Holder for 1/4 x 7/8 x 1-1/4 in, 32V dc
  • RS stock no. 849-5778
  • Mfr. Part No. HRK-R
Subtotal (1 unit)
R 163,77(exc. VAT)
R 163,77/unit
In Stock
Schurter 10A PCB Mount Fuse Holder for 6.3 x 32 mm, 250V ac
  • RS stock no. 866-4703
  • Mfr. Part No. 0031.3571
Subtotal (1 pack of 10 units)
R 724,03(exc. VAT)
R 72,403/unit
Temporarily out of stock
Eaton 30A Rail Mount Fuse Holder, 2P-Pole, 600V ac
  • RS stock no. 182-1526
  • Mfr. Part No. CHCC2DU
Subtotal (1 box of 6 units)
R 1 908,108(exc. VAT)
R 318,018/unit
Temporarily out of stock
Eaton 30A Panel Mount Fuse Holder for 6.3 x 32 mm, 480V
  • RS stock no. 225-8216
  • Mfr. Part No. BK-HVP-HH-R
Subtotal (1 bag of 100 units)
R 10 286,91(exc. VAT)
R 10 286,91/bag
In Stock
Siemens 50A Rail Mount Fuse Holder for 14 x 51 mm, 2P-Pole, 690V
  • RS stock no. 225-5423
  • Mfr. Part No. 3NW7121
Subtotal (1 unit)
R 1 122,04(exc. VAT)
R 1 122,04/unit
1
85
88
Results per page

Related links