Fuse Holders & Accessories

We offer a superb range of fuse holders and accessories for domestic and commercial use from a range of brands including Schurter, Littelfuse, Cooper Bussmann and Mersen.

What is a fuse holder?

A fuse holder is a casing or housing into which fuses are inserted, simply to hold the fuse in place in order to fulfill its function. They come in many shapes, colours and sizes depending on where they need to be installed.

What types of fuse holder are available?

You will find the following types on the site:

  • Base mount: enables the base of the holder to be attached to something with holes for screws
  • Bottle fuse: a holder for cylindrical bottle fuses, usually with a cap to complete the circuit
  • Inline: a housing for a fuse in a wire or cable, usually for safety purposes
  • Panel mount: another housing with a screw cap that can be mounted into a panel for easy access to the fuse
  • Rail mount: a holder that contains fuses that are slotted into sets with metal contacts

We also stock fuse blocks, clips, switches and covers as well as PCB mounts and other types of accessories.

Why do fuse holders melt?

A fuse holder making poor contact with a fuse can be the cause of this, that is if the fuse has not blown. Current flowing through the electrical circuit, below the fuse's rating, will cause heat from the resistance. This can generate enough heat to cause the fuse holder to melt. It may not be immediate and can happen suddenly after installation.

How do I clean a fuse holder?

  • Ideally wear gloves, either rubber or plastic
  • Ensure the mains power is off and there are no live wires
  • Use a dry cloth or toothbrush to clean the connector springs
  • A small piece of emery cloth wrapped around a screwdriver can be used to scrub the inside of the fuse holder itself
  • Use a small paintbrush to apply lubricant to all areas of the fuse holder once cleaned
Fuse Blocks
Fuse Blocks
Fuse Clips
Fuse Clips
Fuse Covers
Fuse Covers
Fuse Holder Accessories
Fuse Holder Accessories
Fuse Holders
Fuse Holders
Fuse Pullers & Testers
Fuse Pullers & Testers
Neutral Links
Neutral Links
Solid Links
Solid Links

1758 Products showing for Fuse Holders & Accessories

Sort by
84 of 88
Temporarily out of stock
Eaton 25A 6.3 x 32 mm, Panel Cartridge Fuse Block, 250V ac
  • RS stock no. 233-0595
  • Mfr. Part No. BK2-S-4201-1-R
Subtotal (1 pack of 10 units)
R 274,31(exc. VAT)
R 27,431/unit
In Stock
Eaton 20A Panel Mount Fuse Holder, 1P-Pole for 32 mm, 25V
  • RS stock no. 852-6951
  • Mfr. Part No. HTB-48I-R
Subtotal (1 unit)
R 105,66(exc. VAT)
R 105,66/unit
Stocked by manufacturer
Eaton 630A NH3, Busbar NH Fuse Block, 690V
  • RS stock no. 262-622
  • Mfr. Part No. EBF3330M1
Subtotal (1 unit)
R 5 007,16(exc. VAT)
R 5 007,16/unit
Stocked by manufacturer
Eaton 20A Fuse Holder for 60 x 94 mm, 1P-Pole, 690V
  • RS stock no. 263-154
  • Mfr. Part No. CM20FW
Subtotal (1 pack of 10 units)
R 9 435,57(exc. VAT)
R 9 435,57/pack
Stocked by manufacturer
Siemens 100A Fuse Holder, 1P-Pole for 22.2 x 58 mm, 690V
  • RS stock no. 299-650
  • Mfr. Part No. 3NW7252
Subtotal (1 unit)
R 1 910,19(exc. VAT)
R 1 910,19/unit
Stocked by manufacturer
Socomec 160A Base Mount Fuse Holder, 1P-Pole for Size 0, 690V
  • RS stock no. 233-3344
  • Mfr. Part No. 65011010
Subtotal (1 pack of 3 units)
R 1 308,531(exc. VAT)
R 436,177/unit
In Stock
Eaton 630A Base Mount Fuse Holder, 1P-Pole, 1.4kV
  • RS stock no. 182-1370
  • Mfr. Part No. 170H3005
Subtotal (1 unit)
R 2 576,93(exc. VAT)
R 2 576,93/unit
Stocked by manufacturer
Eaton 25A Base Mount Fuse Holder, 3P-Pole, 500V
  • RS stock no. 261-679
  • Mfr. Part No. TFPCD27
Subtotal (1 pack of 12 units)
R 1 805,01(exc. VAT)
R 1 805,01/pack
In Stock
Bulgin 9820 Fuse Cover
  • RS stock no. 408-432A
  • Mfr. Part No. 9820
Subtotal (1 pack of 50 units)
R 724,20(exc. VAT)
R 14,484/unit
Stocked by manufacturer
Siemens 250A Solid Link for LV HRC Fuses
  • RS stock no. 152-949
  • Mfr. Part No. 3NA3244-4KK01
Subtotal (1 unit)
R 11 926,57(exc. VAT)
R 11 926,57/unit
Stocked by manufacturer
Eaton 400A Solid Link for NH Fuses
  • RS stock no. 254-491
  • Mfr. Part No. 263116 Z-NH-2/TR
Subtotal (1 unit)
R 292,80(exc. VAT)
R 292,80/unit
In Stock
Bulgin Polyvinyl Chloride Fuse Cover, IP68, IP66, UL, CSA
  • RS stock no. 408-426A
  • Mfr. Part No. 11327
Subtotal (1 pack of 50 units)
R 1 513,20(exc. VAT)
R 30,264/unit
Stocked by manufacturer
Lovato Electric 32A Rail Mount Fuse Holder for 10 x 38 mm, 1P-Pole, 690V ac
  • RS stock no. 216-8280
  • Mfr. Part No. FB01F1M
Subtotal (1 unit)
R 237,94(exc. VAT)
R 237,94/unit
In Stock
Siemens 63A Bottle Fuse Holder for D03, 500V ac
  • RS stock no. 202-7135
  • Mfr. Part No. 5SH1231
Subtotal (1 pack of 5 units)
R 723,29(exc. VAT)
R 144,658/unit
In Stock
Allen Bradley 30A Rail Mount Fuse Holder, 1P-Pole
  • RS stock no. 220-0589
  • Mfr. Part No. 1492-FB1C30
Subtotal (1 pack of 12 units)
R 4 397,556(exc. VAT)
R 366,463/unit
In Stock
TE Connectivity 30A Rail Mount Fuse Holder
  • RS stock no. 299-075
  • Mfr. Part No. 1SNF100028R0000
Subtotal (1 unit)
R 351,47(exc. VAT)
R 351,47/unit
Temporarily out of stock
Littelfuse 10A Panel Mount Fuse Holder, 25V
  • RS stock no. 769-0152
  • Mfr. Part No. 03455LF1H
Subtotal (1 pack of 5 units)
R 768,97(exc. VAT)
R 153,794/unit
In Stock
Schurter 16A Panel Mount Fuse Holder, 1P-Pole for 6.3 x 32 mm, 250V ac
  • RS stock no. 216-4285
  • Mfr. Part No. 7093.0110
Subtotal (1 unit)
R 1 477,63(exc. VAT)
R 1 477,63/unit
Temporarily out of stock
Schurter 30A Rail Mount Fuse Holder for 10 x 38 mm, 2P-Pole, 600V ac
  • RS stock no. 712-4796
  • Mfr. Part No. 0091.0002
Subtotal (1 unit)
R 638,01(exc. VAT)
R 638,01/unit
Stocked by manufacturer
Siemens 32A Fuse Holder, 3P-Pole for 10 x 38 mm, 690V ac
  • RS stock no. 269-8377
  • Mfr. Part No. 3NW7034-1
Subtotal (1 unit)
R 1 864,03(exc. VAT)
R 1 864,03/unit
1
84
88
Results per page

Related links