Fuse Holders & Accessories

We offer a superb range of fuse holders and accessories for domestic and commercial use from a range of brands including Schurter, Littelfuse, Cooper Bussmann and Mersen.

What is a fuse holder?

A fuse holder is a casing or housing into which fuses are inserted, simply to hold the fuse in place in order to fulfill its function. They come in many shapes, colours and sizes depending on where they need to be installed.

What types of fuse holder are available?

You will find the following types on the site:

  • Base mount: enables the base of the holder to be attached to something with holes for screws
  • Bottle fuse: a holder for cylindrical bottle fuses, usually with a cap to complete the circuit
  • Inline: a housing for a fuse in a wire or cable, usually for safety purposes
  • Panel mount: another housing with a screw cap that can be mounted into a panel for easy access to the fuse
  • Rail mount: a holder that contains fuses that are slotted into sets with metal contacts

We also stock fuse blocks, clips, switches and covers as well as PCB mounts and other types of accessories.

Why do fuse holders melt?

A fuse holder making poor contact with a fuse can be the cause of this, that is if the fuse has not blown. Current flowing through the electrical circuit, below the fuse's rating, will cause heat from the resistance. This can generate enough heat to cause the fuse holder to melt. It may not be immediate and can happen suddenly after installation.

How do I clean a fuse holder?

  • Ideally wear gloves, either rubber or plastic
  • Ensure the mains power is off and there are no live wires
  • Use a dry cloth or toothbrush to clean the connector springs
  • A small piece of emery cloth wrapped around a screwdriver can be used to scrub the inside of the fuse holder itself
  • Use a small paintbrush to apply lubricant to all areas of the fuse holder once cleaned
Fuse Blocks
Fuse Blocks
Fuse Clips
Fuse Clips
Fuse Covers
Fuse Covers
Fuse Holder Accessories
Fuse Holder Accessories
Fuse Holders
Fuse Holders
Fuse Pullers & Testers
Fuse Pullers & Testers
Neutral Links
Neutral Links
Solid Links
Solid Links

1758 Products showing for Fuse Holders & Accessories

Sort by
81 of 88
Temporarily out of stock
Hager Fuse Holder Accessory Microswitch
  • RS stock no. 144-4542
  • Mfr. Part No. LS671
Subtotal (1 unit)
R 578,69(exc. VAT)
R 578,69/unit
In Stock
Wickmann 6.3A PCB Mount Fuse Holder, 250V ac
  • RS stock no. 167-9297P
  • Mfr. Part No. 55900000001
Subtotal 10 units (supplied in a box)
R 119,07(exc. VAT)
R 11,907/unit
Stocked by manufacturer
Eaton 16A Base Mount Fuse Holder, 3P-Pole for D01, 400V
  • RS stock no. 262-001
  • Mfr. Part No. TFPCD01
Subtotal (1 pack of 14 units)
R 510,20(exc. VAT)
R 510,20/pack
In Stock
Eaton 30A Fuse Holder, 3P-Pole, 600
  • RS stock no. 182-1817
  • Mfr. Part No. CHCC3DIU
Subtotal (1 unit)
R 733,02(exc. VAT)
R 733,02/unit
In Stock
Schurter 32A Panel Mount Fuse Holder, 2P-Pole for 5 x 20 mm, 600V ac
  • RS stock no. 144-1825
  • Mfr. Part No. 0031.9156
Subtotal (1 unit)
R 393,81(exc. VAT)
R 393,81/unit
Stocked by manufacturer
Eaton 125A Fuse Holder for 22 mm x 58 mm, 3+N-Pole, 690V
  • RS stock no. 229-020
  • Mfr. Part No. CH223DNU 3P+N 22x58 Fuse Holder
Subtotal (1 unit)
R 3 398,24(exc. VAT)
R 3 398,24/unit
In Stock
Littelfuse 16A Panel Mount Fuse Holder for 6.3 x 32 mm, 250
  • RS stock no. 769-0164
  • Mfr. Part No. 80000000005
Subtotal (1 pack of 5 units)
R 235,73(exc. VAT)
R 47,146/unit
Stocked by manufacturer
Eaton PKZ4 Series Tag Fuse Holder Shroud, CE
  • RS stock no. 272-1324
  • Mfr. Part No. 186878 HB-PKZ4-CB
Subtotal (1 unit)
R 124,94(exc. VAT)
R 124,94/unit
Temporarily out of stock
Eaton 30A Rail Mount Fuse Holder, 3P-Pole, 600V ac
  • RS stock no. 703-8197P
  • Mfr. Part No. CCP-3-30CC
Subtotal 1 unit (supplied in a box)
R 3 690,40(exc. VAT)
R 3 690,40/unit
Stocked by manufacturer
Eaton 30A Fuse Holder for 10 x 38 mm, 1P-Pole, 1kV
  • RS stock no. 262-010
  • Mfr. Part No. CHPV1IU
Subtotal (1 pack of 12 units)
R 4 879,63(exc. VAT)
R 4 879,63/pack
In Stock
Eaton 10A Panel Mount Fuse Holder for 5 x 20 mm, 250V ac
  • RS stock no. 233-0568
  • Mfr. Part No. BK14-HTC-613M
Subtotal (1 pack of 10 units)
R 1 875,87(exc. VAT)
R 187,587/unit
In Stock
Eaton 30A Rail Mount Fuse Holder, 2P-Pole, 600V ac
  • RS stock no. 703-8188P
  • Mfr. Part No. CCP2-2-30CC
Subtotal 1 unit (supplied in a box)
R 2 360,20(exc. VAT)
R 2 360,20/unit
Temporarily out of stock
Schurter 16A PCB Mount Fuse Holder for 5 x 20 mm, 500V ac
  • RS stock no. 173-7978
  • Mfr. Part No. 0031.2510
Subtotal (1 box of 25 units)
R 6 992,975(exc. VAT)
R 279,719/unit
In Stock
Lovato Electric 32A Holder for 10x38mm, 3P-Pole, 690V
  • RS stock no. 820-469
  • Mfr. Part No. FB01F3PL
Subtotal (1 unit)
R 973,40(exc. VAT)
R 973,40/unit
Temporarily out of stock
Littelfuse Fuse Holder Accessory Holder/Cap
  • RS stock no. 787-4325P
  • Mfr. Part No. 83700000005
Subtotal 5 units (supplied in a bag)
R 315,18(exc. VAT)
R 63,036/unit
In Stock
Littelfuse 15A PCB Mount Fuse Holder, 32V dc
  • RS stock no. 787-4344P
  • Mfr. Part No. 01530009Z
Subtotal 1 unit (supplied in a bag)
R 69,92(exc. VAT)
R 69,92/unit
Stocked by manufacturer
Siemens 32A Fuse Holder, 3P-Pole for 10 x 38 mm, 690V ac
  • RS stock no. 269-8376
  • Mfr. Part No. 3NW7033-1
Subtotal (1 unit)
R 1 312,63(exc. VAT)
R 1 312,63/unit
In Stock
Eaton 30A Rail Mount Fuse Holder, 1P-Pole, 80V dc
  • RS stock no. 703-8194P
  • Mfr. Part No. CCP-1-DCC
Subtotal 1 unit (supplied in a bag)
R 1 285,30(exc. VAT)
R 1 285,30/unit
In Stock
Socomec 32A Rail Mount Fuse Holder for 10 x 38 mm, 3P-Pole, 690V ac
  • RS stock no. 122-5260
  • Mfr. Part No. 57010018
Subtotal (1 pack of 4 units)
R 2 144,84(exc. VAT)
R 536,21/unit
In Stock
Bulgin 6.3A PCB Mount Fuse Holder for 5 x 20 mm, 250V ac
  • RS stock no. 417-098
  • Mfr. Part No. FX0321
Subtotal (1 pack of 5 units)
R 334,83(exc. VAT)
R 66,966/unit
1
81
88
Results per page

Related links